3-lance TLE Special

State of the art 3 lance flexlance machine with special features to remove extremely difficult contamination. Automatic cleaning system placing the operator out of reach of high pressure water means maximum safety. Excellent cleaning results due to consistent speed and 2 way cleaning. Average cleaning speed 250-300 tubes per hour. Light weight pneumatic remote control for easy operation. Designed for horizontal and vertical heat exchangers with most types of contamination.

Peinemann introduces the new way of cleaning bundles with flex-lances, with the capacity of a rigid lancing machine. The 3 TLE Special was developed to clean all kinds of heat exchangers, which need to be cleaned insitu. The machine operates by means of friction blocks, which push the flex lances into the tubes. As the drive system is very close to the tube sheet, the flex lances cannot bend and therefore, all the water pressure can be used for cleaning the exchangers.

The 3 TLE special is suitable for insitu bundles, air fin coolers, condensers, furnaces and normal heat exchangers. Operation is done by remote control and the flex-lances can be moved in the tubes with an oscillating movement for the removal of extremely hard products. Excellent cleaning results by means of front and back cleaning with a consistent speed and a max of 3 flex lances at the same time.  The machine can also be used in a vertical position and can be used as a stand alone system with guide hoses for example to enter a bundle through a manhole.

In case a tube is plugged, the machine will continue with the other 2 flex lances and the friction blocks will slip over the flex lances which doesn’t move.

Technical Specifications

Maximum capacity	2 air motors of 0,82 HP each = 1,64 HP at 380 RPM
Minimum air pressure	4,0 Bar
Maximum air pressure	6,3 Bar
Airconsumption	30-40 L/S (with standard air motors)
Cleaning speed	0,1 m/sec. - up to 150 cm/sec. (adjustable with the air pressure)
Min.-max. flex lance size	8 - 20 mm outside diameter
Max. pull / push strength	appr. 1500 N
Water pressure	Depending on the hoses used (2800 bar is possible)
Water flow	Depending on the hoses used
Dimensions	2100 x 900 x 2100 mm
Weight	250 kg

For further information about prices or technical specifications please contact us here.

Bundle Extraction

• Aerial Tube Bundle Extractor
• Self Propelled Bundle Extractor
• Truck Mounted Bundle Extractor
• Furnace Tube Extractor
• 30T Bundle Lifter

Bundle Cleaning

• Single Lance Tube Cleaner
• Single Lance Tube Cleaner XL
• 3-lance TLE Basic
• 3-lance TLE Special
• TLE Rigid Lance
• Trans Line Exchanger Cleaner
• Scissorlift TLE
• Inside Bundle Cleaner IBC-5
• Outside Bundle Cleaner
• Outside Bundle Cleaner XL
• Heavy Duty Rollers

Search

•  

Contact

• Phone: +31(0)10-29 55 000
• Fax: +31(0)10-29 55 049
• Contact Form
• Peinemann Dutch Website
• Peinemann Russian Website