Self Propelled Bundle Extractor

Peinemann introduces the new Self Propelled Bundle Extractor, a machine with a maximum capacity of 25T and 2 stearing axles.

The new self propelled bundle extractor is designed to handle large number of bundles during maintenance shutdowns in combination with our aerial extractors for the bundles at high locations. The extractor has 2 steering axles in order to reduce the turning radius and to be able to drive diagonally to reach bundles in the most difficult aria’s.

The height of the extractor has been reduced to 3.35M in order to facilitate transport on the highway on a low-bed trailer and to be able to drive underneath pipe frames in the plant. The machine can be equipped with a radiographic remote control as well as a standard remote control with a cable.

This extractor is considered to be one of the fastest and most versatile machines in the world for extracting bundles during large shutdowns due to it’s compact design, short turning radius and very simple operation. 

Technical Specifications

Operational monitoring instruments	Water temperature, oil pressure, load control, air pressure, hand-brake indicator lamp, oil pressure gauge for all hydraulic systems, vacuum warning horn for the suction side of the hydraulic pumps Automatic motor cut-off when hydraulic oil drops below the minimum level. Two separate air brake systems for the trailer and the self-propelled unit - combined air and spring hand-brake
Electronic control system	24 volt relay control with variable electronic oil quantity adjustment of all the hydraulic functions. Selector switch for hydraulic pump 1 or 2. All functions can be operated from the cabin as well as by remote control
Safety devices	Emergency power-off switch on both control platforms. All load-bearing hydraulic cylinders are individually safeguarded against excessive pressure. All load-bearing hydraulic cylinders have a line break safety mechanism
Carrying force 25 tons	Front and back axles are each constructed for a carrying load of 25 tons
Regulations applied in the construction and calculation	DIN 4100 15019 Din 4114 as well as accident prevention regulations Crane VBG 9 and VBG 9a as well as lifting platform VBG 14
Length	7,30 m
Width	2,80 m
Height minimum	3,35 m
Dead Weight	22 T
Maximum working height	(above ground to bottom of the sheet) 5,70 m
Minimum working height	(above ground to bottom of the front tube sheet) 0,80 m
Maximum bundle diameter	2,00 m
Maximum bundle weight	up to 25 T
Maximum bundle length	8,00 m
Maximum tensile force	50 T
Pulling rate	6 m/min.
Speed	appr. 10 km/H

For further information about prices or technical specifications please contact us here.

Bundle Extraction

• Aerial Tube Bundle Extractor
• Self Propelled Bundle Extractor
• Truck Mounted Bundle Extractor
• Furnace Tube Extractor
• 30T Bundle Lifter

Bundle Cleaning

• Single Lance Tube Cleaner
• Single Lance Tube Cleaner XL
• 3-lance TLE Basic
• 3-lance TLE Special
• TLE Rigid Lance
• Trans Line Exchanger Cleaner
• Scissorlift TLE
• Inside Bundle Cleaner IBC-5
• Outside Bundle Cleaner
• Outside Bundle Cleaner XL
• Heavy Duty Rollers

Search

•  

Contact

• Phone: +31(0)10-29 55 000
• Fax: +31(0)10-29 55 049
• Contact Form
• Peinemann Dutch Website
• Peinemann Russian Website