Two Lance Tube Cleaner FinFan (2-LTC Fin Fan) with Flexframe

The Peinemann Two Lance Cleaners have the capabilities of cleaning both vertical and horizontal bundles at difficult to reach locations in combination with a relatively small HP pump. The whole construction is still portable and can be positioned at difficult to reach areas. Various sizes of flex lances can be used depending on the tracks installed.

2-LTC Flexframe

A light weight and safe setup that will allow for cleaning bundles at difficult to reach locations with ease. The flex Frame setup is very portable which is easily mounted on the flange of the bundles. Here too the clamp plate will allow for different models of machines making it extremely versatile. The same remote can be used for all movements of the Flex Frame and 2-LTC.

2-LTC Fin Fan with Flexframe

Same setup as our 2-LTC Flexframe but with the wider bodied 2-LTC design for Fin Fan cleaning. Due to limited space available at airfin banks it was essential to limit the overall length of the machine. With the design being made slightly wider it is ideally suitable for the wider pitch of approx. 6.5 cm which is common with airfin coolers. This wider 2-LTC Fin Fan can also be used on all other configurations as shown in the images.

Cleaning with 2 flex lances at one time. Cleaning is done twice. The nozzle travels in and out of the tube under pressure. Thanks to the constant speed of the nozzle going in and out no contamination or fouling will remain behind.

Additional accessory

The 2-LTC FinFan can be used with the Industry-leading Automated Hole Location Flex Frame Retro-Fit Kit which allows you to automatically navigate hole-to-hole during tube bundle cleaning with a single click of a button.

Technical Specifications

Hose Size (OD) 6 mm - 11,5 mm (,24" - ,45")
Maximum OD hose coupling 17,3 mm (,68")
Standard Pitch distance (adjustable) 65 mm (2,56")
Maximum Capacity 0,38 KW (0,5 PK)
Minimum air pressure 3,0 Bar (45 Psi)
Maximum air pressure 6,3 Bar (95 Psi)
Air consumption 180 L/min. at max RPM (6.3 CFM)
Recommended flow 76 ltr (20 gallon) per min. (2 x 38 ltr./2 x 10 gallon)
Recommended pressure 1000 Bar (15,000 psi)
Maximum pressure Suitable to work with pressures up to 2800 Bar (40,611 Psi)
Cleaning speed 0,45 m - 0,70 m/sec (18" - 30" per second)
(adjustable with air pressure)
Max. pull/push strength approx. 250 Newton (183 foot Pounds)
Weight (approx) depending on setup required
Frame dimensions in working setup depending on setup required
For further information about prices or technical specifications please contact us here.