Single Lance Tube Cleaner (1-LTC)

Tube cleaning just got a lot safer

High Pressure cleaning of heat exchangers has never been this easy and safe! Excellent cleaning results due to consistent speed and front and back cleaning.

The weight is only 8,5 kg (19 pounds) and pays for itself immediately because it greatly increases both productivity and operator safety. The operator uses the 1-LTC by positioning the nozzle end against the tube to be cleaned. The operator manipulates the simple controls to retract or extend the high pressure hose, at the appropriate speed, into the tube while applying water pressure. The 1-LTC conveys the hose using polyurethane friction blocks mounted within the assembly. The speed and pressure of the 1-LTC can be varied according to the hose being used and the contamination inside the tubes. The consistent speed both backwards and forwards delivers excellent cleaning results in the shortest time possible. The standard single lance machine is most suitable for 4/2 and 5/2 (DN 4 and 5) or 1/16" and 1/8" flex lances.

  • Safe
  • Light and compact
  • 8,5 kg (19 Lbs.) total weight
  • Horizontal & vertical operation
  • Easily adapts to hose pressure and length
  • Perfect for tight spaces
  • Consistent, controllable speed in each direction

Technical Specifications

Min - Max air pressure 3.0 Bar (45 psi) - 6.3 Bar (95 psi)
Air consumption 180 liters per minute at max RPM (6,3 CFM)
Cleaning speed with standard air motor At 3 Bar (45 psi) 45 cm/s (18" per second)
At 6.3 Bar (95 psi) 70 cm/s (30" per second)
Cleaning speed with slow air motor (optional) At 3 Bar (45 psi) 14 cm/s (5,5" per second)
At 6.3 Bar (95 psi) 19 cm/s (7,5" per second)
Min - max flex lance outside diameter 1 LTC : 8 - 12 mm (,314 - ,477")
XLTC : 11 - 15 mm (,433 - 590")
Max. pull / push strength Approx 150 Newton / 110 foot pounds
Weight 1-LTC 9 kg (19 lbs.)
Recommended nozzle Neutral configuration
For further information about prices or technical specifications please contact us here.