30T Bundle Lifter
Innovative and safe
The Peinemann Equipment Bundle Lifter is the most recent development with regards to lifting bundles at Refineries and (Petro) chemical plants. The unit is self-supportive due to the use of an air-cooled diesel engine. The engine drives the hydraulic pump and is equipped with a spark arrestor. All hydraulic functions are remotely controlled for increased safety of the operator. The bundle lifter can be adjusted to the diameter of the bundle by means of 2 sets of hydraulic cylinders fitted with holding valves.
The operator cannot get his hands in between the slings and the bundle. The operator doesn’t need to climb on the trailer to handle the slings.
The bundle lifter is easy to position above the bundle which saves a lot of time. When the bundle lifter puts the bundles on the rollers for cleaning, the lifting slings are normally around the baffle plates causing problems. With the bundle lifter, the bottom of the bundle is free, making it easy to load it on the rollers.
The rigger doesn’t have to lift any heavy slings anymore and doesn’t get dirty when he operates the wireless remote control.
The bundle lifter carries the bundle over a length of 3.6m avoiding damages to the tie rods and baffle plates. Especially when the bundles are fitted with half baffle plates and diagonal baffle plates, the bundle lifter has a great advantage compared to the lifting slings.
The bundle lifter can be operated by just 1 operator in comparison to 2 operators when using the traditional lifting slings.
|Weight||approx. 4000 kg / 8,818 lbs.|
|Length||3600 mm / 11.81 ft|
|Transport height||3499 mm / 11.15ft|
|Transport width||8.2 ft|
|Bundle diameter||300 mm - 2000 mm / 0,98 ft - 6,56 ft
(baffle-plate diameter max. 1850 mm / 6.07 ft)
|Operation||2-hands control with wireless remote|
|Engine||Hatz 2 cylinder ait cooled engine with spark
arrestor and hydraulic pump