30T Combi Lifter & Bundle Extractor 25T

Innovative and safe

The latest development for lifting bundles is the Peinemann Combi Lifter. This lifter can both be used as an integral part of the Aerial Bundle Extractor (Main Lifting Frame) as well as a separate Bundle Lifter when disconnected from the Aerial Bundle Extractor. After pulling out a Heat Exchanger, the combi lifter can be put on the ground and the lifter can easily remove the Heat Exchanger without disconnecting the crane. The bundle can be easily lowered onto a trailer for transport to the cleaning area.

The operator can open or close the bundle lifter by means of 6 hydraulic cylinders in order to adjust the clamps according to the size of the bundle. When the side clamps are adjusted to the size of the bundle, the operator can lift the bundle lifter by means of the crane and the bundle will be lifted. The machine can lift the bundles from the extractors, trailers, rollers or from the ground. As the bundle lifter holds several baffle plates on the bundle, damage to the tubes or tie rods is down to a minimum, making this a very safe, efficient and time saving tool. The new 50t lifter has additional advantages by being both compact, low in transport height and it has a better reach for inside the superstructure.

Safety

All load-bearing hydraulic cylinders are fitted with holding valves.  The system is driven by a Hatz diesel engine type 2G 40 with an hydraulic pump. The bundle lifter will be equipped with a back up system consisting of the chains with short nylon slings which will hold the bundle in case of emergency. The machine will be supplied with a CE certificate.

Versatile & Efficient

The unit is self-supportive due to the use of an air-cooled diesel engine. The engine drives the hydraulic pump and is equipped with a spark arrestor. All hydraulic functions are remotely controlled for increased safety of the operator. The machine does not require attachment to any external utility.

The operator can open or close the bundle lifter by means of 3 hydraulic cylinders in order to adjust the clamps according to the size of the bundle. When the side clamps are adjusted to the size of the bundle, the operator can lift the bundle lifter by means of the crane and the bundle will be lifted.

The machine can lift the bundles from the extractors, trailers, rollers or from the ground. As the bundle lifter holds several baffle plates on the bundle, damage to the tubes or tie rods is down to a minimum, making this a very safe, efficient and time saving tool.

Technical Specifications

Weight 3600 kg (7,937 lbs)
Height in transport condition max. 2810 mm (9.22 ft)
Transport width 2500 mm (8.20 ft)
Min. transport width (container) 2100 mm (6.89 ft)
Max. baffle plate diameter 1600 mm (5.25 ft)
Max. baffle plate diameter as lifter only 1800 mm (5.91 ft) approx.
Min. baffle plate diameter 300 mm (0.98 ft)
Length of blades 3000 mm (9.84 ft)
Max. bundle weight (as lifter only) 30000 kg (66,138 lbs)
For further information about prices or technical specifications please contact us here.